Welcome to hovermill

BUILD IT . BIND IT . FLY IT

LET'S GET STARTED
Shop NOW
HoverMill

CINERIG MINI

$0.00 Save $0.00
/
If you are looking for a small drone that can carry a GoPro and still perform without having to decase your camera, then you have come to the right place! The CineRig Mini is small enough to hit those tight gaps and paired up with the Xing 1404 4600KV motor, it is powerful enough carry a GoPro Hero 8 no problem! We packed some big punch in this small drone.
HoverMill

CINERIG

$0.00 Save $0.00
/
The CineRig is one of our most prized frames. We have flown a bunch of the other CineWhoops out there and they all had some kind of issue we didn't like, so we built one with all those issues in mind. The biggest flaw we wanted to fix was replaceable arms. All the other frames out there in this category don't have replaceable arms, when you break one you have to replace the whole bottom plate which is a big pain because it pretty much leads to a whole rebuild. This is a huge process, not only do you have to take off all 4 motors (even if you break one arm) you also have to take off the FC/ESC stack, VTX, RX, Camera, and Antennas then place them on the new bottom plate. We eliminated this by adding in replaceable arms. This saves you a lot of time and money in the long run. This was our goal with this frame, the ultimate CineWhoop! It also flies really well, just check out some of our videos.
HoverMill

RIG5/6/7

$0.00 Save $0.00
/
The RIG 5, 6 and 7 frame has been a long time in the making. We have gone through about 10 different prototypes and a lot of testing to get this frame where it is at today. Now it is a piece of art, it comes with 5",6", or 7" arms (whichever you choose for your build) that are easily swapped out depending on what size props and motors you would like to run. The body has been made very skinny in width and a bit longer than the original design so it can easily hold a DJI Air Unit inside the frame for those of you who fly DJI FPV. With the 3mm bottom plate, 2mm top plate, 5mm arms and a 3mm locking plate makes for a very strong frame. We've also designed a nice TPU antenna mount for the back that is flexible enough so that when you crash, it helps minimize breaking your antennas but is strong enough to hold it sturdy in its place. It also comes with a small lightweight TPU GoPro mount that can hold the Hero 8 from its bottom brackets or you can get our GoPro Holder that is universal to all of our GoPro Mounts. This frame when built out with our recommended electronics, motors and cameras is perfect for capturing your cinematic FPV shots but also great for freestyling and racing.
HoverMill

RIG10

$0.00 Save $0.00
/
We designed this frame because we wanted to carry a DSLR size camera on a smaller more compact drone than the Beast Class. This allows longer flight times and distances when paired up with the right battery, motors and props while maintaining the high video quality of a DSLR or Mirrorless Camera.
HoverMill

CINEBEAST

$0.00 Save $0.00
/
The CineBeast is our most ambitious project yet! We noticed people flying around bigger cinema cameras and DSLR's but were just using frames that were for racing so we decided to design a beast class frame specifically designed for flying bigger cameras. @sammie started this design from scratch, he even incorporated a dampening system to bring less vibrations from the drone to the camera. This one is a serious work of art and we love flying and filming with it!
HOVERMILL
BNF
BIND N FLY
HOVERMILL
RTF
READY TO FLY
BEST ANALOG FPV GOGGLE
FATSHARK HDO2
THINGS JUST GOT PERSONAL.
The HDO2 is the perfect headset for an experienced pilot looking for the best flight experience
ADD TO CART
CAPTURE EVERY MOMENT
FEATURED FPV VIDEO
Pushing the limits from behind the goggles.
GET FEATURED
Dji Digital FPV System
Reimagine your FPV World
The DJI Digital FPV System was designed for the drone racing industry. It consists of the DJI FPV Air Unit Module, DJI FPV Camera, DJI FPV Goggles, and DJI FPV Remote Controller, all of which are packed with powerful features and serve a significant role in the development of our HD Low Latency FPV system.
Watch demo add to cart
Tattu

Tattu R-Line Version 3.0 1550mAh 22.2V 120C 6S Lipo Battery Pack with XT60 Plug

$41.99 Save $-41.99
/

Tattu R-Line Version 3.0 1550mAh 22.2V 120C 6S1P LiPo battery pack is the updated version of R-Line series in 2019. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V3 definitely dominate all your races.

What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of top pilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular top pilot batteries. There are different R-Line versions for the needs of different FPV racing competitions.

Features:   

  • High quality, reliable power
  • Higher capacity than comparable size packs
  • Very high C rate. Designed for professional FPV racing
  • Stable automatic stacking technology enables single-cell capacities of 1550mAh
  • No memory effect.

Specifications:

  • Minimum Capacity: 1550mAh
  • Configuration: 6S1P / 22.2V / 6 Cells
  • Discharge Rate: 120C
  • Max Burst Discharge Rate: 240C
  • Charge Plug: JST-XHR
  • Discharge Plug: XT60
  • Net Weight(±20g): 256g
  • Dimensions:76mm x 38mm x 47mm (L x W x H)

⚠WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

iFlight

XING X2208 1800KV / 2150KV 2-6S FPV NextGen Motor (Unibell)

$21.99 Save $-21.99
/

PRODUCT DESCRIPTION

The iFlight XING series motor is designed and named by FPV pilot & specialist Patrick Xing. Combining IFlight's high-quality motor production technology with Patrick Xing's technical expertise, a top-of-the-line motor has been produced. iFlight XING provides the most incredible power and thrust in the lightest weight. The elliptical body, powerful stator with N52H magnets and very small air gap makes iFlight XING series motor incredible new style motors.

iFlight continues the tradition of making the best and most fitting products to offer different size and KV value to meet different pilots' needs. The 4mm Titanium alloy shaft and high-quality N52H magnets surrounded by high-temperature resistant windings. It means that the iFlight XING series motor can be pushed to the limit. The sturdy structure and high quality materials make iFlight XING performs like a beast.

There's non slip design on the contact surface of iFlight XING motor and propellers to increase the friction and to improve durability; Multi-heat dissipation hole design, helps to pull heat away continuously； Standard M3 16mm*16mm mounting pattern at the bottom, adapt to all frames on market; Motor cable length 160mm can meet different requirements whether connecting single or 4 in 1 ESC; Each motor has been dynamic balanced, all of them have passed the highest standard iFlight manufacturing and assembling procedure.

Features:

  • Unibell design
  • Elliptical body, high-strength Titanium alloy shaft
  • Crush resistant damping bearing, eliminate vibration effectively
  • Large heat dissipation holes design (15℃ reduced compared to same range motor)
  • 160mm cable length for different frames and setups
  • 50%-80% optimal throttle output, best efficiency
  • Electromagnetically matched magnets and stator
  • 220℃ Pacific Heat-Resistant Copper Wire, Solid Wire Winding
  • N52H High-temperature magnets
  • Japanese Kawasaki 1200 Iron Core
  • Hex bolt shaft set screw
  • Motor wire protected 
  • 37.3g with wires
  • Dynamically balanced

Package included:

  • XING 2208 Motor * 1pc
  • Hardware set * 1 bag

Customer Reviews

No reviews yet Write a review
TeamBlackSheep

TBS CROSSFIRE TX LITE - LONG RANGE R/C TRANSMITTER

$149.95 Save $-149.95
/

A NEW ERA OF CONNECTIVITY

The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self healing two way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link.

Remote control links, however, are tasked with much more than range. Latency, telemetry, strength against interference, connectivity with smart devices, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead :)

DEVELOPED BY EXPERTS

Team BlackSheep has been notorious for long range records, close-to-ground proximity flying in the Alps and deep urban operations. During our numerous missions all around the globe we have gathered a list of requirements, and have found that no existing system can cover them all. So we set on a long and painful path to develop a RC link system entirely from scratch, put it through its paces for over a year to ensure top-notch reliability and state-of-the-art functionality.

Through the OLED Display on the transmitter, you can monitor the real-time location of your drone (TBS GPS or BlackBox with DJI Naza or APM-based GPS required).  The up- and downlink status provide a feeling of safety, the configuration options through the OLED display do away with any PC-based configuration tools. The pulsing LED relays your link budget and link health in colorized form (green = keep going, orange = turn around). In case of a crash, the location of the drone is visible on the OLED as well. The built in battery on the receiver turns it into a beacon automatically - and it will continue to transmit its last known location until the battery runs out. 

TELEMETRY / CRSF

As a modern R/C link, it has telemetry built in. Two way communication opens up new possibilities. From updating your firmware, setting your video transmitter channel to adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms. 

DOWNLOADS

FEATURES:

  • Long range, adaptive and robust remote control system for your aircraft
  • Immune to on-board noise
  • Self-healing & frequency hopping (DSSS, FHSS)
  • Two-way communication link with real-time link vitals and telemetry
  • Serial Modem capable of transmitting serial protocols (up & downlink)
  • Adaptive bandwidth control and range optimization
  • Super easy binding and configuration via built-in display
  • RX beacon mode to recover your downed aircraft
  • Two receiver models: 8ch Diversity Rx, 4ch PPM/SBUS Mini-receiver (4g weight!)
  • Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
  • Ability to fly with multiple friends at the same time (10 or more)
  • 8 or 12ch output via PPM/SBUS/CRSF on both receivers
  • Dedicated head-tracking input option for full FPV immersion
  • Selectable RF power from 10mW to 2W (local restrictions apply)
  • Short-Range mobile connectivity telemetry output for smartphone apps
  • Transmitter LED shows link health, OLED display for built in configuration
  • CRSF protocol interface to Betaflight, Kiss and Raceflight FCs ( lower latency, higher update rate, telemetry support ) 
  • Fully configurable by OpenTX and TBS TANGO remote using CRSF protocol 
  • Micro-receiver for smaller drones. Smaller than you think!
  • Expansion port for future feature support
  • Software updates via RF Link

TECHNICAL SPECIFICATIONS:

  • Input Voltage: 3.5 - 13V
  • Power consumption: 1.1W (@10mW) - 3.2W (@2000mW)
  • Dimensions: 55 x 89 x 15 mm
  • Weight: 76g
  • Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)

PACKAGE INCLUDES

  • TBS Crossfire Transmitter
  • TBS Crossfire JR Adapter
  • TBS Crossfire Stock Tx Antenna V2
  • Crossfire Futaba cable
  • Crossfire Graupner cable
  • Crossfire PWM Pigtail
  • Crossfire JST to XT30 cable
RunCam

RunCam Phoenix 2

$26.99 Save $-26.99
/
RunCam Phoenix 2
Day & Night ƒ/2.0 big aperture freestyle camera.
· 1/2'' big image sensor · ƒ/2.0 big aperture · Excellent low light performance · Less digital image shimmer
RunCam Phoenix 2
Rich yet natural color.
With upgraded CPU and upgraded 1/2'' high-performance image sensor,
the RunCam Phoenix 2 produces vivid high-resolution pictures.
RunCam Phoenix 2
Excellent low light performance.
The 1/2'' super global WDR image sensor, Phoenix 2's low light
performance is even better than the RunCam Eagle.
RunCam Phoenix 2
ƒ/2.0 big aperture lens. Less red lens flare.
The high quality 6 layers of glass lens has a ƒ/2.0 aperture which brings
less red lens flare and less purple fringing effect.
RunCam Phoenix 2
Less digital shimmer.
Compare to the RunCam Eagle, the RunCam Phoenix 2 has way
less digital shimmer and a much cleaner image.
Low latency.
This camera is on the same latency level of the RunCam Eagle
and is wonderful for freestyle flying!
RunCam Phoenix 2

Dimensions

RunCam Phoenix 2

Package

  • RunCam Phoenix Oscar Edition Package
    1x Camera
  • RunCam Phoenix Oscar Edition
    1x ABS bracket
    RunCam Phoenix Oscar Edition
    1x 6pin FPV silicone cable
  • RunCam Phoenix Oscar Edition
    1x Set of screws
    RunCam Phoenix Oscar Edition
    1x Manual
Parameters
Model RunCam Phoenix 2
Image Sensor 1/2" COMS Sensor
Horizontal Resolution 1000TVL
Lens 2.1mm ​(M12)​ FOV155° (4:3)
Screen Format 4:3 / 16:9 switchable
Mirror/Flip Available
Signal System PAL / NTSC Switchable
S/N Ratio >50dB (AGC OFF)
Electronic Shutter Speed Auto
Auto Gain Control (AGC) Auto
Min. Illumination [email protected]
WDR Global WDR
Day/Night Color/BW/EXT/Auto
Menu Control Cable Control
Power DC 5-36V
Current
200mA@5V 85mA@12V
Housing Material ABS
Net Weight 9g
Dimensions 19mm*19mm*20mm

Manual

UserManual
English
BrainFPV

Radix Flight Controller

$54.99 Save $-54.99
/

Introducing radix, the smartest, most innovative line of drone electronics BrainFPV has ever developed.

  • The fastest STM32 F4 processor running at 180MHz, as well as the industry leading Bosch gyro for an unparalleled flight performance!
  • Never run out of space with the MicroSD card slot for logging enthusiasts!
  • Integrated BAROMETER, a necessity for long range flyers! How high are you?
  • A dedicated camera control pad for changing camera settings in the field.
  • FOUR full hardware serial ports (UARTs), making it easy to use telemetry, change VTX settings, without ever running out of ports! Two of them feature signal inverters for S.Bus and SmartPort, allowing for a flawless setup!
  • On top of the normal Betaflight OSD, radix on-screen-display gives you extra features you can't get anywhere else. Proudly show off your pilot and team logo using our logo customizer with just a click of a button. Extra features also include a graphical barometer scale, artificial horizon, gyro spectograph, RC stick display, 3D OSD support and more! 

radix is engineered to perfection with a visually stunning form factor and plug-n-play stacking. The radix flight controller uses soft cables for vibration isolation and stacks seamlessly on the radix power board, Hobbywing 4-in-1 ESC, and radix wing power board (wPB). Its simple, sophisticated design facilitates a faster build time and minimizes human error.

Impressive

Large image with text box

Pair large text with a full-width image to draw attention to an important detail of your brand or product line.